VENT-AXIA COMPACT + HEAT
Vent-Axia Pozidry Compact + Heater for flats and appartments with no roof or loft space.
Best prices in the UK - Delivery and VAT included - no hidden extras
• BBA Approved
• Ultra low sound level
• Selectable air capacities to suit volumes of up to 34 l/s or floor area up to 100m2
• Extremely low running costs - from less than one pence per day
• Washable, high capacity G4 filter
• Day logger feature as standard
• Round to rectangular duct adaptor included
• 5 Year Guarantee
• Ideal for apartments
Positive Pressure Ventilation
For those properties that do not have a loft, the BBA approved Lo-Carbon PoziDry Compact provides an easy to install solution. The unit is duct mounted and can be fitted in a number of locations within a single floor flat or apartment.
Air is drawn into the Lo-Carbon PoziDry Compact unit via an external inlet and through a short length of duct. The specially developed fan/motor assembly (using the Lo-Carbon DC motor technology) draws the air through an integral, high capacity, washable filter. The backward curved impeller guarantees
increased efficiency, lower sound levels and better performance.
The fresh, filtered airflow passes along the ducting and terminates on an internal wall with a discreet grille. This directs the airflow upwards where the incoming air mixes with the warm air that gathers at ceiling height.
The system provides fresh, tempered air into the home and creates an indoor environment where the damaging effects of condensation find it hard to exist, benefiting both the occupants and the structure of the building.
The Lo-Carbon PoziDry Compact can be used for air replacement in conjunction with an extractor fan. A G4 filter is included as standard.
The Lo-Carbon PoziDry Compact uses a sensor to monitor the ambient temperature, automatically adjusting the air volume when necessary and providing partial heat recovery.
Trickle speed is automatically selected when the ambient temperature is up to 18°C. Normal is automatically selected when the ambient temperature is between 18 and 27°C.
If the ambient temperature exceeds 27°C, the Lo-Carbon PoziDry Compact will automatically switch to standby (no airflow). The standby power consumption is 2W.
In the case of the integral 300W heater version, the heater element is automatically activated when necessary and tempers the supply air to 10°C.
Air Replacement Grille Set
For air replacement through doors. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic. Dimensions: 454 x 90mm. See Ducting section.
As standard. Measures the number of days the product has been switched on to provide precise running information.
HOW IT WORKS
The machine introduces dry/filtered air from outside into the home.
The damp/stale air is expelled from the building through any air spaces such as cracks in floorboards, letter boxes, doors etc.This has the effect of curing condensation and making for a healthy environment.
Note that the running costs are not high. Only about 20% of all the heating costs heat the air and only a small part of the air is actually input by the unit - and only when needed.
A Flatmaster installation would take an average of 5 hours hours to fit depending on the configuration of the dwelling. Can be a DIY job but have the wiring checked. Note that approx. 4" hole is needed to be drilled through the wall but this would be the case if a normal fan were to be fitted.
Extra ducting will/may be required - local DIY store will supply.
The drying effect is almost immediate, a few days at the most, but any black mould must be cleaned off once never to return.
Every 5 years the filters need swapping for new.......otherwise leave it alone to dry the home automatically.
GUARANTEE Manufacturers Guarantee of 5 years parts and labour