Freephone 0800 1978 766
MORI HR100 + SWITCH
£210.00 inc. tax

£175.00 ex. tax
? Tax based on United Kingdom.

MORI HR 100 + CONTROL SWITCH 149 SEN CTRL
USP
Heat recovery ventilation with added control 
£2 per year running  
retro fit quickly  in 100mm hole

Switch allows you manual control your MORI HR 100 :-

Heat recovery mode OFF ( the MORI 100 will revert to preset extract or input ventilation)
2 speeds (increase ventilation at will)
OFF switch (not used often - if you go on holiday keep the unit running - costs next to nothing)

Note. At installation the MORI 100 is installed to input or extract air. This option may be used to set up an air flow between 2 units, in tandem, having one set to input and the other to output. We prefer the heat recovery mode for each unit plus a switch.

A continuously running, low energy, ultra quiet, alternate flow supply and extract fan with heat retention for use in all habitable areas such as  damp bedrooms, lounge, dining room & utility rooms. The unit helps a room “breathe” and reduces indoor air pollutants and humidity levels. The unit designed to cure condensation and mould growth by lowering humidity. The unit is not designed for use in 'wet areas' such as bathrooms or kitchens....see ELTA MORI DMEV11 for wet rooms

Operation:
When extracting air the units high efficiency ceramic heat exchanger collects and retains heat from the outgoing air. After 70 seconds  the flow is reversed and the heat is  transferred back to the incoming air. After 70 seconds the cycle is repeated. thus clean dry air enters and the heat is retained. 

This flow design is much more effective than conventional HRVs where incoming and outgoing air get more mixed.

Two or more units may be set to work in harmony with each other e.g. when a unit in one room is extracting air another unit in another room can be set to supply air. This will greatly enhance cross ventilation efficiency within a home and reduce humidity

Quick Facts
  • Ultra quiet
  • Very low running costs - set on low about £2 per year
  • Heat retention - about 10% heat loss through refreshing the air
  • Set airflow manually inside unit - 3 - 4- 7L/s
  • Remote switching Stop/Speed settings/Stop heat recovery facility
  • 5 year warranty

WHY BUY FROM DRYHOMES?
Best prices in the UK including delivery and VAT – no hidden extras
Dryhomes have been selling & installing for 30 years.

RUNNING COST
Note that the running costs are extremely low. Only a few pence a day

FITTING
A MORI HR 100 would take a competent electrician 2-3 hours to fit in an average wall - even if he has never seen one before. It can be a DIY job but have the wiring checked after installation by an electrician. The unit can replace a 'normal' fan as the hole diameter is 100mm -4" - this will take about an hour on average.

EFFECTIVENESS
The drying effect is almost immediate, a few days at the most, but any black mould must be cleaned off once never to return.

GUARANTEE Manufacturers Guarantee of 5 years parts and labour ....

Product Condition: New
Product Code: MORIHR100SW

Reviews

No Reviews Posted Yet - be the first! write review
0 Related Products

All Products

Best Buys

New Products

Trade Bundles

Offer
SANO iPIV LOFT x 4
£1,200.00
SANO iPIV LOFT x 4
£1,060.00
Offer
DRI-ECO-LC x 3
£825.01
DRI-ECO-LC x 3
£790.00
Hot!
ELTASANO iPIV LOFT
ELTASANO iPIV LOFT
£300.00
DRI-ECO-LC
DRI-ECO-LC
£275.00
new
MORI HR100 + SWITCH
MORI HR100 + SWITCH
£210.00
Hot!
DRI-ECO-CO2 Sensor
DRI-ECO-CO2 Sensor
£180.00
new
MORI HR100 + SWITCH
MORI HR100 + SWITCH
£210.00
DRI-ECO-LC x 3
£825.01
DRI-ECO-LC x 3
£790.00
SANO iPIV LOFT x 4
£1,200.00
SANO iPIV LOFT x 4
£1,060.00
Offer
DRI-ECO-LC x 3
£825.01
DRI-ECO-LC x 3
£790.00
Offer
SANO iPIV LOFT x 4
£1,200.00
SANO iPIV LOFT x 4
£1,060.00
Offer
DRI-ECO-HEAT-HC x3
£1,020.00
DRI-ECO-HEAT-HC x3
£990.00
Product Added to your Cart
x

-------- OR --------