5No ELTA MORI HR100
5 No. MORI HR 100 - LANDLORD SPECIAL
Heat recovery ventilation - £2 per year running - no upset tenants)
choice of 3 speeds - retro fit quickly in existing fan 100mm hole
Cure condensation in bed sits and bedrooms
A continuously running, low energy, ultra quiet, alternate flow supply and extract fan with heat retention for use in all habitable areas such as damp bedrooms, lounge, dining room & utility rooms. The unit helps a room “breathe” and reduces indoor air pollutants and humidity levels. The unit designed to cure condensation and mould growth by lowering humidity. The unit is not designed for use in 'wet areas' such as bathrooms or kitchens....see ELTA MORI DMEV11 for wet rooms
When extracting air the units high efficiency ceramic heat exchanger collects and retains heat from the outgoing air. After 70 seconds the flow is reversed and the heat is transferred back to the incoming air. After 70 seconds the cycle is repeated. thus clean dry air enters and the heat is retained.
This flow design is much more effective than conventional HRVs where incoming and outgoing air get more mixed.
Two or more units may be set to work in harmony with each other e.g. when a unit in one room is extracting air another unit in another room can be set to supply air. This will greatly enhance cross ventilation efficiency within a home and reduce humidity
- Ultra quiet
- Very low running costs - set on low about £2 per year
- Heat retention - about 10% heat loss through refreshing the air
- Set airflow manually inside unit - 3 - 4- 7L/s
- Optional extra. Remote switching Stop/Speed settings/reverse flow Ref 149-SEN-CTRL
- 5 year warranty
WHY BUY FROM DRYHOMES?
Best prices in the UK including delivery and VAT – no hidden extras
Dryhomes have been selling & installing for 30 years.
Note that the running costs are extremely low. Only a few pence a day
A MORI HR 100 would take a competent electrician 2-3 hours to fit in an average wall - even if he has never seen one before. It can be a DIY job but have the wiring checked after installation by an electrician. The unit can replace a 'normal' fan as the hole diameter is 100mm -4" - this will take about an hour on average.
The drying effect is almost immediate, a few days at the most, but any black mould must be cleaned off once never to return.
GUARANTEE Manufacturers Guarantee of 5 years parts and labour ....